HyppoCoat100
Hybrid Polyurea/Polyurethane Trafficable Deck Coating
HyppoCoat 100 is a two component, fast-setting, rapid-curing, solvent-free, high-performance & high-solids aliphatic polyurea/polyurethane waterproof coating that can be utilized suitably for heavy-duty wearing surface applications on prepared interior or exterior concrete, plywood, and metal surfaces. Due to its fast gel time, HyppoCoat 100 is suitable for applications in temperatures as low as 20°F. It is also relatively insensitive to moisture, allowing for applications in various temperatures and humidity.
HyppoCoat PC (Primer Coat)
Two-Component Solvenated Epoxy-Polyamine Primer
HyppoCoat PC is a two component, solvenated, epoxy-polyamine liquid-applied primer with unique penetrating characteristics. This primer is recommended for use with HyppoCoat 100 and HyppoCoat 250 Trafficable Waterproofing Systems on metal flashings and other medium to heavy duty trafficable areas in outdoor applications. Two versions of this primer can be used— HyppoCoat PC (100 VOCs) and HyppoCoat PC+ (250 VOCs).
HyppoCoat BC (Base Coat)
Water-Catalyzed Polyurethane Elastomeric Trafficable Base Coat
HyppoCoat BC is a non-gassing, solvent-free, single component, liquid applied, water-catalyzed polyurethane elastomeric waterproofing basecoat. This unique product allows the base membrane to be applied in one application up to 3” (7.6 cm) deep down to a feather edge and cures simultaneously throughout the coating in approximately 4 hours at 75ºF (24ºC) and 50% relative humidity. The basecoat may be used for very rough or highly textured surfaces and where sloping or pond filling is desired.
HyppoCoat TC (Top Coat)
Two-Component High Solids Aliphatic Elastomeric Top Coatane Trafficable Deck Coating
HyppoCoat TC is a two-component, very high solids, aliphatic hybrid elastomeric top coat. HyppoCoat TC is odor friendly, fast-setting, rapid-curing, and can be applied to properly prepared interior or exterior concrete, plywood and metal surfaces. It is suitable for single or multiple applications in temperatures as low as 45°F (7.2ºC).
-
Trust.
Barrett has over 40 years of rubberized asphalt waterproofing experience on many of our nation's monumental structures, computer data centers, museums, and mission-critical structures, proving on-going performance with zero failures. Experienced in system development, manufacture, and application, our expertise is born from 5 generations and 90+ years of roofing and waterproofing success.
-
Our Promise to You.
With a national network of trained Approved Contractors, over a thousand distributors, and complete design and specification assistance available from our technical staff, Barrett can make your life easier while keeping your project on schedule and watertight for decades to come.
APPROVED CONTRACTORS
Barrett roofing and waterproofing warrantied applications must be installed by Barrett Approved Contractors. Each fully approved contractor is experienced, financially stable, and carefully selected at the time of approval. We are proud to have over 300 fully equipped Barrett Approved Contractors across the US.
QUALITY CONTROL
Over $50 million has been invested in the technology, research, and development of our various product lines. Each polymer-modified bitumen production run is individually certified to be in conformance with specifications prior to shipping. Barrett's expert technical staff is available to work with designers and specifiers during project development and construction to assure proper design and installation. Many of our systems are UL® and FM® Approved.
PROJECT WARRANTY
The Barrett Company offers long-term warranties of up to 30 years for labor and materials. Terms vary depending on the product and application. If you are interested in discussing the terms of a warranty for a roofing or waterproofing application, please reach out to our technical staff or email us at info@barrettroofs.com
ENVIRONMENTAL
Barrett makes the environment a priority in the engineering, manufacturing, and recycling of its roofing products. Our RAM-Tough 250 system is made using recycled tires & plastics, and the asphalt/polyester reinforcing membrane can be recycled into high-quality asphalt concrete highway mix. Energy Star® Certified roof surfaces are offered for most systems, which can contribute to LEED® credits. Greenroof-Roofscapes® offer many environmental contributions well beyond any other roof type.